Technical Information
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Hardware/Server Information
You can find LOCKSS's current server specifications in the LOCKSS install document located here.
Basically, you have two options for setting up a LOCKSS server for ADPNet:
Option 1: Purchase Your Server From A Vendor
Here's what we recommend if you are purchasing a server from a vendor:
- An x86 Intel compatible CPU running at 1GHz or better
- A minimum of 1GB of memory (2GB of memory is recommended)
- A bootable CD or DVD drive
- A motherboard with a SATA disk controller (ideally with support for 6 SATA devices)
- Must support the CentOS v5.4 Linux operating system
- A chassis capable of holding at least 4 2-terabyte hard drives
Option 2: Roll Your Own Server
Recently, Auburn University built its own LOCKSS server as a replacement for an older box that had some hardware failures.
Below is the parts list for Auburn's roll-your-own-server build. Prices are current as of 8/1/11 and are given as a general reference point only; of course they can be expected to change over time and across vendors.
Part | Part # | Quantity | Price | Link | Notes |
Chassis | CSE-813MTQ-520CB | 1 | $264.99 | link | |
Motherboard | MBD-X8SIL-V-O | 1 | $169.99 | link | Make sure that whatever motherboard you purchase is capable of running CentOS 5.4 and that it will fit in the chassis that you choose |
CPU | BX80605X3430 | 1 | $204.99 | link | You will not be using the included fan, but instead the heatsink listed below |
Heatsink | SNK-P0046P | 1 | $21.99 | link | Thermal paste comes pre-applied with this heatsink. |
Memory | KVR1333D3E9SK2/4GI | 1 | $44.99 | link | Make sure to purchase memory that is compatible with the motherboard you choose |
CD/DVD Drive | DVM-PNSC-DVD-SBT1 | 1 | $47.19 | link | Make sure the CD/DVD Drive you purchase will fit in the chassis you choose |
Hard Drives | 0F12117 | 4 | $99.99 ea. | link | Make sure they are SATA drives. 3.0 Gb/s or 6.0 Gb/s |
Slimline SATA Female to SATA w/ LP4 Power Cable | SLSATAF20 | 1 | $13.99 | link | Auburn needed this part to connect the above listed CD/DVD drive to the motherboard. Depending on the parts you purchase you may or may not need this cable. |
If you have any questions about rolling your own server contact Jon Bell b e l l t h o @ a u b u r n . e d u.